Industrial aluminum profiles
1.Profile Series: Typically categorized by metric series (e.g., 20, 30, 40, 45, 80, 90) or imperial (1.5", 3"). 2. Accessory Compatibility: Most profiles use standard T‑slot nuts (M4, M5, M6, M8). 3. Customization: Available in custom dimensions, hole patterns, and special alloys.
Classification :
PRODUCT DETAILS
Here's a detailed parameter table for industrial aluminum profiles in English:
| Parameter | Description | Common Values |
| Material | Alloy type used for extrusion | 6061-T6, 6063-T5, 6005-T5, 6082-T6 |
| Surface Treatment | Protective or decorative finish | Anodizing (Clear/Black), Powder Coating, Mill Finish, Brushed, Sandblasted |
| Tolerance | Dimensional accuracy | ±0.1mm ~ ±0.5mm (depending on profile complexity) |
| Length | Standard extrusion length | 1m, 2m, 3m, 4m, 5m, 6m (Custom lengths available) |
| Weight | Linear density (weight per unit length) | Varies by profile (e.g., 0.5kg/m to 5kg/m) |
| Moment of Inertia | Resistance to bending (important for structural applications) | Ix, Iy values specified for each profile (mm⁴) |
| Section Modulus | Bending strength capacity | Zx, Zy values (mm³) |
| Tensile Strength | Maximum stress before failure | 150-310 MPa (varies by alloy) |
| Yield Strength | Stress at which permanent deformation begins | 110-276 MPa (varies by alloy) |
| Hardness | Material hardness (Brinell or Vickers scale) | 60-95 HB (6061-T6), 45-75 HB (6063-T5) |
| Thermal Conductivity | Heat transfer capability | 160-210 W/m·K |
| Electrical Conductivity | Current carrying capacity (relative to copper) | 50-60% IACS |
| Corrosion Resistance | Natural resistance to oxidation | High (especially with anodizing) |
| Slot Size | Standard T-slot dimensions for accessories | 6mm, 8mm, 10mm (Series 30/40/45/80 etc.) |
| Wall Thickness | Minimum thickness of profile walls | 1.0mm - 3.0mm (varies by profile design) |
| Operating Temperature | Safe temperature range | -50°C to +150°C (higher with special alloys) |
| Standards Compliance | Industry standards met | ISO 9001, ASTM B221, EN 755, GB/T 6892, DIN/EN 12020-2 |
Packing and shipping
Our company has passed ISO9001 quality management system certification, Our Mill product with CE/EN10204 / ASTM/Classification society certificate/CASO/BIS etc certificate.All the customers give good appreciation to our products.We are glad to be your good partner.
CUSTOMER FEEDBACK
We are committed to providing products and services to our customers at any time, fully understanding their needs, fulfilling our duties without exception, and striving for sustainable development.
QUALITY INSPECTION
QUALITY INSPECTION
QUALITY INSPECTION
QUALITY INSPECTION
QUALITY INSPECTION
QUALITY INSPECTION
QUALITY INSPECTION
FAQ
Q: Do you support custo
A: Yes. We provide one-stop deep processing services, including slitting, flattening, cutting, bending, welding, polishing, drilling, hot-dip galvanizing and color coating. Custom sizes, special thicknesses and surface treatments are all acceptable.
Q: Can you provide third-party inspection reports?
A: Yes. We support SGS, BV, TUV and other third-party inspections. Each batch is equipped with official factory MTC mill test certificate, chemical composition and mechanical property reports.
Q: How to choose the right steel grade for my project?
A: Carbon steel is suitable for general structure and fluid transportation; galvanized/color coated steel for anti-rust building enclosure; stainless steel for corrosion-resistant, sanitary and marine environments. Our professional sales team can recommend the most cost-effective solution according to your usage scenario, temperature, corrosion environment and load requirements.
Q: What standards do your steel products comply with?
A: All products support international mainstream standards, including GB, ASTM, AISI, JIS, DIN, EN. Common grades such as Q235B, Q355B, 20#, 45#, 304, 316L, 430 are fully available and can meet global engineering and procurement standards.
Q: What steel products do you supply?
A: We provide a full range of steel materials, including carbon steel, stainless steel, galvanized steel, color coated steel, steel plates, steel coils, steel pipes and customized steel profiles. Products are widely used in construction, machinery, petrochemical, shipbuilding, automobile and engineering fields.
RELATED PRODUCTS
316L stainless steel coil is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches.
DC01 Galvanized Round Steel refers to round bars produced from DC01 steel (a cold-rolled mild steel grade per EN 10130, known for good formability) that have been hot-dip galvanized for corrosion protection. It is commonly used for components requiring good formability and surface protection, such as in general hardware, light structural applications, and various fabricated parts.
The tensile strength of ST42 Carbon Steel Pipe shall not be less than 42kgf/mm2, which is 420MPa.ST42 Carbon Steel Pipe is a German standard seamless steel pipe, which is widely used. German standard seamless steel pipes for general purposes are rolled from ordinary carbon structural steel, low alloy structural steel or alloy structural steel, with the largest output, and are mainly used as pipes or structural parts for fluid transportation .
430 stainless steel is used for building decoration, fuel burner parts, household appliances and household appliances. 430F is a steel with free cutting property added to 430 steel, mainly used for automatic lathes, bolts and nuts. 430LX adds Ti or Nb to 430 steel to reduce the content of C, which improves the processability and welding performance. It is mainly used in hot water tanks, hot water supply systems, sanitary appliances, household durable appliances, bicycle flywheels, etc.
Stainless steel round bar is a common type of steel, which is widely used in industrial production, machining, construction and other fields.
H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used.
PPGI is galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance.
GET A FREE QUOTE
CONTACT US
Dongchang Road, Dongcheng Street, Liaocheng Economic and Technological Development Zone, Shandong Province
GET A FREE QUOTE