Home page

DIN Carbon steel round bar

Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties. Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 t carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel

Classification :

Steel Round Bar

Carbon Steel Round Bar

WhatsApp : +8619063501250

E-mail : sales@jiehuanlntl.com

Online Message

PRODUCT DETAILS

Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties.
Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 t carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel.

Material	API5L
Thickness	0.1mm-300mm or as required
Standard	AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique	Hot rolled,cold rolled
Surface Treatment	Clean, blasting and painting according to customer requirement
Thickness tolerance	±0.1mm
Application	It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time	Within 7-15 workdays after receiving deposit or L/C
Export packing	Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity	250,000 tons/year

Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for
drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

CUSTOMER FEEDBACK

We are committed to providing products and services to our customers at any time, fully understanding their needs, fulfilling our duties without exception, and striving for sustainable development.

Packing and shipping

Our company has passed ISO9001 quality management system certification, Our Mill product with CE/EN10204 / ASTM/Classification society certificate/CASO/BIS etc certificate.All the customers give good appreciation to our products.We are glad to be your good partner.

Application Areas

Steel is widely used in steel structure workshops, bridge frames, main structures of high-rise buildings, and infrastructure construction (such as highways, oil and gas pipelines). Its high strength properties ensure load-bearing stability and seismic performance. In ship manufacturing, steel is used to build hull structures, decks, and internal components. Hot-rolled coils rely on their load-bearing capacity to adapt to harsh environments. ‌

CUSTOMER FEEDBACK

We are committed to providing products and services to our customers at any time, fully understanding their needs, fulfilling our duties without exception, and striving for sustainable development.

QUALITY INSPECTION

FAQ

Q: Do you support custo

A: Yes. We provide one-stop deep processing services, including slitting, flattening, cutting, bending, welding, polishing, drilling, hot-dip galvanizing and color coating. Custom sizes, special thicknesses and surface treatments are all acceptable.

Q: Can you provide third-party inspection reports?

A: Yes. We support SGS, BV, TUV and other third-party inspections. Each batch is equipped with official factory MTC mill test certificate, chemical composition and mechanical property reports.

Q: How to choose the right steel grade for my project?

A: Carbon steel is suitable for general structure and fluid transportation; galvanized/color coated steel for anti-rust building enclosure; stainless steel for corrosion-resistant, sanitary and marine environments. Our professional sales team can recommend the most cost-effective solution according to your usage scenario, temperature, corrosion environment and load requirements.

Q: What standards do your steel products comply with?

A: All products support international mainstream standards, including GB, ASTM, AISI, JIS, DIN, EN. Common grades such as Q235B, Q355B, 20#, 45#, 304, 316L, 430 are fully available and can meet global engineering and procurement standards.

Q: What steel products do you supply?

A: We provide a full range of steel materials, including carbon steel, stainless steel, galvanized steel, color coated steel, steel plates, steel coils, steel pipes and customized steel profiles. Products are widely used in construction, machinery, petrochemical, shipbuilding, automobile and engineering fields.

RELATED PRODUCTS

316L Stainless steel coil

316L stainless steel coil is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches.

DC01 Galvanized Sheet

DC01 Galvanized Round Steel refers to round bars produced from DC01 steel (a cold-rolled mild steel grade per EN 10130, known for good formability) that have been hot-dip galvanized for corrosion protection. It is commonly used for components requiring good formability and surface protection, such as in general hardware, light structural applications, and various fabricated parts.

ST42 Carbon steel pipe

The tensile strength of ST42 Carbon Steel Pipe shall not be less than 42kgf/mm2, which is 420MPa.ST42 Carbon Steel Pipe is a German standard seamless steel pipe, which is widely used. German standard seamless steel pipes for general purposes are rolled from ordinary carbon structural steel, low alloy structural steel or alloy structural steel, with the largest output, and are mainly used as pipes or structural parts for fluid transportation .

430 Stainless steel plate

430 stainless steel is used for building decoration, fuel burner parts, household appliances and household appliances. 430F is a steel with free cutting property added to 430 steel, mainly used for automatic lathes, bolts and nuts. 430LX adds Ti or Nb to 430 steel to reduce the content of C, which improves the processability and welding performance. It is mainly used in hot water tanks, hot water supply systems, sanitary appliances, household durable appliances, bicycle flywheels, etc.

Stainless steel round bar

Stainless steel round bar is a common type of steel, which is widely used in industrial production, machining, construction and other fields.

AISI Stainless H beam

H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used.

PPGL DX52D

PPGI is galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance.

GET A FREE QUOTE